DBX 223xs Crossover

DBX 223xs Crossover

DSPPA MP9916E

DSPPA MP9916E

DBX 234xs

DBX 234xs

DBX 223xs Crossover

EGP 12,815.00
XLR balanced ins and outs , Mode switch for stereo 2-way or mono 3-way operation ,Low frequency summed (subwoofer) output>x10 range switch on both channels
Availability: In stock
Only 2 left
SKU
223xs
DBX

More sound to your amps and speakers The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.

More Information
BrandDBX
AvailabilityYes
Inputs

XLR (pin 2 hot)

Outputs

XLR

Indicators

Stereo Operation (Green)

Mono Operation (Yellow)

Low Cut (Red-per channel)

x10 (Green-per channel)

Phase Invert (Red-per output)

Noise< 3 Hz to > 90 kHz, +0/-3 dB
THD+N< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
Specification

Signal to Noise Ratio                        Ref: +4 dBu, 22 kHz measurement bandwidth

 

Signal-to-Noise (Stereo Mode)         >94dB (Low Output), >91dB (High Output)

 

Signal-to-Noise (Mono Mode)           >94dB (Low Output), >93dB (Mid Output), >91dB (High Output)

 

Dynamic Range                               > 106 dB, unweighted, any output

 

Interchannel Crosstalk                    < -80 dB, 20 Hz to 20 kHz

 

Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

 

Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

 

Crossover Filter Type              Linkwitz-Riley, 24 dB/octave, state-variable

 

Low cut Switch                        Inverts the phase at the output, one switch per output.

 

Phase Invert Switch                Inverts the phase at the output, one switch per output.

 

x1 / x10 Switch                       Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.

 

Mode Switch Selects stereo/mono and 2/3-way operation

 

LF Sum Switch                      Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode.

Operating Temperature 32°F to 113°F (0°C to 45°C)

Power Connector IEC receptacle

Consumption15W
Power Requirements100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
Dimensions1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
test