The BOSS LS-2 Line Selector pedal allows you to switch easily between several different effects and route input and output signals flexibly. The LS-2 can also supply 9V DC power to several BOSS compact pedals when used with an AC adapter - this makes the LS-2 an ideal power supply and master switching unit for multiple effects setups.
The LS-2 Line Selector pedal represents the easy way to switch settings among several effects devices or amplifiers, or route input and output signals. Two line loops and six looping modes provide a wide variety of applications.
BOSS LS-2 Line Selector Pedal Features:
Two line loops and six looping modes provide a wide variety of effects and switching applications
Provides two line loops with level control and six looping modes
Supplies power to several BOSS compact pedals when used with an AC adapter (opt. power supply: PCS20A)
INPUT jack: 1/4-inch phone type SEND jacks A/B: 1/4-inch phone type RETURN jacks A/B: 1/4-inch phone type OUTPUT jack: 1/4-inch phone type DC IN/OUT jack
Indicators
Line indicator A/B (Used for indication of check battery)
Consumption
25 mA
Dimensions
Height : 59 mm Depth : 129 mm Width : 73 mm
Weight
410 g
Specification
Nominal Input : Level-20 dBu Input Impedance :1 M ohm Nominal Output Level : -20 dBu Output Impedance : 1 k ohms Recommended Load Impedance : 10 k ohms or greater Bypass : Buffered bypassControls Expected battery life under continuous use : Carbon: Approx. 14 hours & Alkaline: Approx. 30.5 hours * These figures will vary depending on the actual conditions of use.
Controls
MODE selector switch LEVEL knobs A/B Pedal switch
Power Supply
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61) AC adaptor (PSA series: sold separately)
