DBX 1260m 12x6 Digital Zone Processor

DBX 1260m 12x6 Digital Zone Processor

DBX 640m 6x4 Digital Zone Processor

DBX 640m 6x4 Digital Zone Processor

TC Electronic CLARITY M

TC Electronic CLARITY M

DBX 1260m 12x6 Digital Zone Processor

EGP 73,670.00
12x6 Zone Processor (6 mic/line)
Availability:
In stock
SKU
ZonePro 1260m
DBX

The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.

A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.

Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.

All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).

ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.

More Information
BrandDBX
Inputs

12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input

Input Type       Euroblock (Mic/Line), RCA (Source)

Input Impedance             Euroblock: >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA: >25kΩ Unbalanced, RF Filtered

Max Input        +20dBu Mic/Line, +12dBu RCA

Outputs

6 Total

Outputs                                     Balanced, RF filtered Euroblock x6

Output Impedance                    120Ω balanced & 60Ω unbalanced

Maximum Output Level             +20dBu


Effects

Available on Input Inserts: 

  • Automatic gain control 
  • Notch filter 
  • Compressor 
  • Gate 
  • De-esser 
  • Advanced feedback suppression 

Available on Output Inserts: 

  • Automatic gain control
  • Ambient noise compensation
  • AutoWarmth 
  • Compressor 
  • Limiter
Controls

9 User-Specified Front Panel Control

Optional ZC Controllers

Ethernet Control

Serial Control

Third Party Control

THD+N0.003% typical at +4dBu, 1kHz, 0dB gain
Specification

CMRR:                               > 40dB, typically >55db @ 1kHz

Mic Pre Gain                      30 to 60dB

Mic Input Noise (E.I.N.):     < -118dBu, 22Hz-22kHz, 150Ω source impedance

A/D Conversion                  dbx Type IV conversion system

Dynamic range line:           >113dB, A-weighted, >110dB unweighted

Type IV dynamic range:     >119dB, A-weighted, 22kHz BW   &   >117dB, unweighted, 22kHz BW

Sample Rate                      48kHz

D/A Conversion                  Dynamic range: 112dB A-weighted, 109dB unweighted, 22kHz BW

Operating System Requirements

Windows 2000/XP/Vista/7 
No 64-bit support

Dimensions45mm x 483mm x 197mm (H x W x D)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account