Novation AudioHub 2x4

Novation AudioHub 2x4

Pioneer DM-40

Pioneer DM-40

Rode NT1 KIT

Rode NT1 KIT

Novation AudioHub 2x4

Ultra-Low Latency for Live Performance , Connect To Just About Anything ,Capture Balanced Audio ,
Availability: In stock
AudioHub 2x4

Your Ultimate Electronic Music Production Hub

Audiohub 2x4 is a combined audio interface and USB hub for electronic music production with Focusrite sound quality. It lets you connect and power all your USB gear at once, while getting ultra-low latency audio and super loud output.

Declutter Your Setup

Sick of having USB hubs, interfaces, cables and power supplies cluttering up your studio desk space? Us too. That's why we designed a single unit that does it all. Just connect all your USB and audio gear to Audiohub 2x4:

Three USB 2.0 ports for bus-powering your whole setup

Matched stereo inputs for sampling pristine audio

Four line RCAs or two balanced jack outputs with super high quality sound

Focusrite Sound Inside

This isn't just a USB hub; it's a powerful audio interface too. We partnered with Focusrite, who make the best sounding audio interfaces in the world, to make sure Audiohub 2x4 gives you extraordinary quality 96 kHz, 24-bit audio performance. This allows you to sample and capture pristine quality audio and listen back with zero latency at the click of a button.

Perfect for Live Performance

Connect your main speakers and cue sub to high quality balanced and unbalanced outputs, with totally independent level control. The headphone output is also ludicrously loud, which is essential. We put all the volume and status controls on the top, to make them easy to access in the darkest environments, then housed the whole thing in a rock solid metal case.

Beat Making and Sampling with NI Maschine

Sample pristine audio through matched stereo inputs and Focusrite audio conversion, then play it back with the same exceptional quality audio, ultra-low latency and super-loud outputs. Do it all whilst bus-powering all your USB gear, so you don't have the usual cable and power supply clutter.

Condense Your DJ Rig

Leave the complexity at home. Connect all your DJ equipment to a single rock solid unit, with blisteringly loud speaker and headphone outputs, and independent level controls helpfully placed on the top. It's so much simpler.

Produce and Perform Electronic Music

Connect and power all your Novation USB and MIDI gear using a single unit. Audiohub 2x4 will blast your music out as loud as you like, while capturing your synth performances with exceptional Focusrite-quality audio, and playing them back with zero latency.

Simplify Your Mobile Rig

Connecting to iPad is a nuisance. Luckily, you can plug all your USB and audio gear into Audiohub 2x4, then connect that to your iPad using a single camera connection kit. Simply play your music in and output it live, all while powering your gear without draining your iPad battery as quickly.

More Information
Sample Rate44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Resolution24 Bit
Gain –0.7dB or +9.1dB
Input for full–scale amplitude low gain (0dBFS) +10.9dBu
Alignment low gain (–18dBFS) –9.3dBV
Alignment High gain (–18dBFS) –19.1dBV
THD+N (–1dBFS sine at 997Hz, 20kHz BW) –97.6dB, 0.0013%
Frequency response (20Hz–20kHz) +0.03dB –0.29dB
Dynamic Range Low gain 105.6dB CCIR-RMS, 109.9dB A-wgt
Dynamic Range High gain 101.7dB CCIR-RMS, 105.9dB A-wgt
Input to Input Crosstalk –84.5dB (1kHz), –96.5dB (20Hz)
Output to Input Leakage –84.8dB (1kHz), –65.1dB (20Hz)

Balanced Outputs

Max output +18.4dBu, +16.2dBV
Max gain (above nominal –10dBV output) +8.2dB
Volume range 69.4dB
THD+N (–1dBFS sine at 997Hz, 20kHz BW) –99.7dB, 0.001%
Frequency response (20Hz–20kHz) +0dB –0.8dB
Noise output –88.9dBu CCIR–RMS, –92.8dBu A-wgt
Dynamic range 106.8dB CCIR–RMS, 111.4dB A-wgt
Output to Output Crosstalk –101.8dB (1kHz), –101.5dB (20Hz)
Input to Output Leakage –83.3dB (1kHz), –93.7dB (20Hz)

Unbalanced Outputs

Max output +14dBu, +11.8dBV
Max gain (above nominal –10dBV output) +3.8dB
Volume range 69.3dB
THD+N (–1dBFS sine at 997Hz, 20kHz BW) –90.6dB, 0.003%
Frequency response (20Hz–20kHz) +0dB –0.78dB
Noise output –90dBu CCIR-RMS, –94.4dBu A-wgt
Dynamic range –104.3dB CCIR-RMS, 108.4dB A-wgt
Output to Output Crosstalk –100.9dB (1kHz), –105.3dB (20Hz)
Input to Output Leakage –89.9dB (1kHz), –99.8dB (20Hz)


Max power (0dBFS, 100Ω) 73mW
Rated power (<1%THD, 100Ω) 50mW
Max output level (unloaded) 14.7dBu
Operating System Requirements
Supported Operating Systems:
  • Mas OS X 10.9 Mavericks, Mac OS X 10.8 Mountain Lion (class compliant)
  • Window 8.1, Windows 8, Windows 7 (ASIO drivers included)
  • iOS 7, 6 (class compliant)

Rear Panel

  • 2 TRS Balanced jack outputs
  • 4 Unbalanced RCA outputs
  • USB type B socket for connection to computer
  • Power jack for included power supply
  • Kensington security slot

Front Panel

  • 2 RCA Line Inputs with selectable gain switch
  • Input Monitor switch
  • Headphone socket with output select switch
  • 3 USB type A sockets for connecting USB devices to the hub

Top Panel

  • 2 Volume controls for outputs 1&2 and 3&4
  • Signal/clip LEDs for outputs 1&2 and 3&4
  • Input signal/clip LED
  • Headphone volume control
  • LEDs to indicate USB ports in use
  • LEDs to indicate Audio interface and USB hub function

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account