The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference. The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps. Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or 20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost ( 6dB @ XHz) designed to boost the intelligibility of dialogue. In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RØDE’s RedDot-winning Blimp.
Brand | Rode |
---|---|
Polar Pattern | Cardioid |
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Address Type | End |
Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Frequency Range | 40Hz - 20kHz |
Impedance | 200Ω |
Max SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Equivalent noise level (IEC 60268-4, A-weighted) | 12dB-A |
Power Options | 9V Battery 9V battery powered +48V phantom power |
Dimensions | 9V Battery 9V battery powered +48V phantom power |