Soundcraft LX7ii 32ch  32 4/4/3

Soundcraft LX7ii 32ch  32 4/4/3

Soundcraft LX7ii 24ch  24 4/4/3

Soundcraft LX7ii 24ch  24 4/4/3

Yamaha MGP32X

Yamaha MGP32X

Soundcraft LX7ii 32ch  32 4/4/3

EGP 136,025.01

LX7ii 32ch 32 4/4/3 :- 32 channel frame sizes •GB30 mic preamp and precision equalisation circuitry •True 7-bus architecture •2 stereo inputs •2 stereo returns •Channel direct outputs •Talkback facility •100mm faders • 48 phantom power •6 aux sends, 4 of which are pre/post switchable •18dB/octave high pass filter •Group and mix inserts •12-segment LED metering •Integral universal voltage, switched-mode PSU for light weight

Availability:
Out of stock
SKU
LX7ii-32
Soundcraft

The Soundcraft LX7 II series of professional analog consoles improves upon an impressive feature set, suited to meet the demands of professional recording and live sound engineers. The LX7 II series is available in 16, 24 and 32 input configurations. Every input features balanced 1/4" phone line level inputs, direct outputs are featured on the first 32 channels for recording and monitoring applications. High quality redesigned microphone preamps are located on every input channel, as well as 1/4" TRS phone inserts for routing signal to external processors. All LX7 II configurations feature 4 sub group outputs that can be used for routing signal to monitors, recorders etc. 6 Aux sends are featured and provide routing to external effects and signal processors. The LX7 II series features the routing and functionality that will prove suitable for crucial recording and live sound reinforcement. 32 Input Configuration The LX7 II console is available in three different channel configurations. This model features 32 input channels with 4 sub group outputs. 4 Sub Group Outputs 4 sub group outputs are featured and allow audio signals to be routed to multi track recorders and monitors. Inserts Inserts are featured on all input channels and group outputs. Inserts allow routing to and from external signal processors. Enhanced Mic Preamplifiers Every input features a Graham Blyth designed microphone preamplifier that delivers exceptional headroom, smooth detail and very low noise floor.

More Information
BrandSoundcraft
Number of Channels32 - Total Line Inputs
Frequency ResponseXLR input to any output: 20Hz to 20kHz, +0/-1dB
Equalizer

100Hz, 18dB per octave
HF: 12kHz, +/-15dB, 2nd order shelving
Hi-Mid: 550Hz-13kHz, +/-15dB, Q=1
Lo-Mid: 80Hz-1.9kHz, +/-15dB, Q=1
LF: 80Hz, +/-15dB 2nd order shelving

Specification
Mic/Line Inputs 32 - Balanced 1/4" TRS Phone Inputs
32 - Balanced XLR Mic Inputs
Stereo Line Inputs 2 - L/R Stereo Paired 1/4" TRS Phone
In-Line Inputs/Returns No
AUX Sends 6 - 1/4" TRS Phone
AUX Returns 2 - L/R Stereo Paired 1/4" TRS Phone )
Inserts No
BUS (Group) Outputs AUX Outputs: 6 - 1/4" TRS Phone
2 Trk Master I/O Main Outputs: L/R Balanced 3-pin XLR male
ALT I/O Monitor Output: L/R 1/4" TRS Phone
2 Trk Input: L/R RCA Phono jacks
Monitor Outputs Monitor Output: L/R 1/4" TRS Phone
EQ Section 100Hz, 18dB per octave
HF: 12kHz, +/-15dB, 2nd order shelving
Hi-Mid: 550Hz-13kHz, +/-15dB, Q=1
Lo-Mid: 80Hz-1.9kHz, +/-15dB, Q=1
LF: 80Hz, +/-15dB 2nd order shelving
Solo/Mute Mute & Solo on all channels
Channel Level Control 100mm Faders
Trim/Gain Control Sealed Rotary Potentiometers
Phantom Power +48 Volt
Metering 12-segment multicolored LED: Group Masters, L/R Master sections
AFL/PFL LED indicator
Frequency Response XLR input to any output:
20Hz to 20kHz, +0/-1dB
Dynamic Range not specified by manufacturer
Signal-to-Noise Ratio < -128dBu (150 Ohm source)
22Hz - 22kHz bandwidth, unweighted
Total Harmonic Distortion (THD) All measurements at +10dBu output 30dB gain
XLR Input to Direct Output: <0.007% @ 1kHz
XLR Input to Mix Output: <0.008% @ 1kHz
Power SupplyUniversal Mains input 85V-270V AC, 50Hz/60Hz Power Consumption - less than 50W
Manufacturer Part NumberRW5676
Dimensions41.4 x 6.5 x 19.8" (1059 x 164 x 503mm) (WxHxD)
Weight50lbs (23kg)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account