Front Angle

Alto Professional TS18S

Behringer DR18SUB

Behringer DR18SUB

Front View

Alto Professional TX18SXEU

Alto Professional TS18S

EGP 45,000.00
2500W 18-inch powered subwoofer with 3-inch voice coil. 137dB max SPL, selectable EQ tunings (Off, Live, DJ), phase alignment 0°/90°/180°/270°.
Availability:
In stock
SKU
TS18S
Alto Professional
Alto Professional TS18S is available to buy in increments of 1

2500-WATT POWERED SUBWOOFER WITH A 18" DRIVER

2500W peak power output

High-efficiency Class D amplifier

Transducer: 18-inch driver with 3-inch high-temperature voice coil

(2) XLR+1/4-inch combo inputs

(2) XLR thru outputs for linking

User-selectable EQ tunings (Off, Live, DJ)

Phase Alignment selector switch (0°/90°/180°/270°)

Rugged, internally-braced front-ported MDF cabinet with integrated 36 mm pole socket

Mark-resistant splatter-spray finish always looks good, even with heavy use

Electronic clip, thermal and transducer overdrive protection

Designed and tuned in the USA

Rock-Solid Sound from the Bottom, Up

The best performances need the best in sound reinforcement at all ends of the sonic spectrum. For tight, punchy low-end look no further than the Alto Professional TS18S powered subwoofer. When added to your full-range speaker setup, the TS18S subwoofer delivers powerful but controlled low-end presence to your PA configuration for a full and complete listening experience for the modern public music space.

The Most Powerful Subwoofer Yet

Sound reinforcement needs can change from night to night but the best in the business count on reliable power at their disposal whenever it's needed. The TS18S is Alto Professional's most powerful subwoofer yet, packing an incredible 2500 watts of power to make concert halls come alive, night clubs punch and pump, houses of worship lift-up instrumental performances, and more. Thanks to its high-efficiency class D amplifier, TS18S adds the necessary heft and weight to any public performance for a balanced representation of musical artistry in any environment.

Carefully Built for Quality Performance

A structure is only as good as its foundation and your sound is no different. The TS18S subwoofer is built with reliable durability in mind to be the anchor of your setup and the anchor of your sound. Built with superior materials, the TS18S is engineered with a premium internally braced composite cabinet enclosure for tight, controlled sound. Enjoy all the thump and bump without the unnecessary rumbles and rattles. The key to low-end is clear definition for impactful sonic transmission and a carefully crafted enclosure ensures a truly unbiased sound delivery. With a premium 18-inch driver featuring a 3-inch, voice coil transducer, rest assured, the TS18S subwoofer is built to handle the rigors of live performance whether permanently installed or as part of a traveling setup, night after night.

A Subwoofer for Any Setting

What good is a sub if it doesn't play along nicely with the rest of your speaker setup? The TS18S is designed and engineered to fit into any system thanks to the versatile onboard electronics switches. Quickly bounce through the User-selectable EQ tunings to enable, boost, or bypass low end accentuation appropriately as different shows require. Use the intuitive Phase Alignment function as needed to make sure your tops and subs perform well no matter the setting or setup. With dedicated input and output paths, seamlessly connect your companion Alto Professional full-range loudspeakers or any other standard loudspeaker units.

More Information
PairSingle
AvailabilityYes
BrandAlto Professional
PoweredYes
Power ConfigurationSubwoofer
Sub Woofer Driver Size18 inch (457 mm) woofer, 3 inch (76.2 mm) high-temp voice coil
Peak Power Capacity2500 W peak @ 4Ω
Power-handling nominal (RMS)Class D amplifier
Impedance4 Ω
Maximum Peak SPL137 dB @ 1m
Frequency Response35 Hz – 100 Hz (-3 dB)
Frequency Range27 Hz – 111 Hz (-10 dB)
Enclosure MaterialInternally braced MDF cabinet, front-ported
Mounting Options36 mm mounting pole socket on top panel, caster inserts M6×1.0mm
Setup ConfigurationUser-selectable EQ tunings (Off, Live, DJ). Phase Alignment selector (0°/90°/180°/270°). Dedicated input/output paths for seamless system integration.
Connectors(2) XLR+1/4" (6.35 mm) inputs, (2) XLR outputs, (1) IEC power cable input
Inputs2 × XLR+1/4" (6.35 mm) combo inputs
Inputs2 × XLR+1/4" combo line inputs
Outputs2 × XLR thru outputs for linking
Outputs2 × XLR thru outputs
Specification2500W peak @ 4Ω. 18" driver with 3" voice coil. 35 Hz – 100 Hz freq response. 137 dB peak SPL. Internally braced front-ported MDF cabinet. EQ tunings: Off/Live/DJ. Phase alignment: 0°/90°/180°/270°. 36mm pole socket. Caster ready.
IndicatorsSignal/clip limiter LED, power LED
Amplifier TypeHigh-efficiency Class D
ControlsVolume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED
Subwoofer AmpClass D, 2500W peak @ 4Ω
Consumption1600 W
Power Requirements100-120V, 50/60Hz; 220-240V, 50/60Hz
Power SupplyIEC
Height26.7 inch (678.2 mm)
Width20.9 inch (530.9 mm)
Depth24.7 inch (627.4 mm)
Weight93.0 lbs (42.2 kg)
Dimensions26.7 × 20.9 × 24.7 inch / 678.2 × 530.9 × 627.4 mm (H × W × D)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
2500W peak power. 18" driver with 3" voice coil. Selectable EQ (Off/Live/DJ). Phase alignment 0°/90°/180°/270°. Front-ported MDF cabinet. 36mm pole socket. Caster inserts.